9
ENGLISH
What information is shown on the display
The following information are shown commonly for all sources.
• If you press DISP on the control panel, the display will show the different information or
different screens. (Details about this will be explained later separately for each source.)
○○○○○○○○○
Canceling the display demonstration
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
To cancel the display demonstration, follow
the procedure below:
1
While playing any source...
The Main Menu appears on
the display.
2
Move the cursor to “PSM” on the Main
Menu.
3
Enter the PSM Menu.
• If “Demo/Link” does not appear, press 5/
∞ repeatedly until it appears.
4
Select “Off.”
To exit from the Menu operation, press
MENU again.
To activate the display demonstration, repeat
the same procedure and select any one other
than “Off” in step
4
.
• For more details, see “To show the display
demonstration—Demo/Link” on page 39.
MENU
OK
BAND
Current source
Sound settings alternately appear
(pages 26 to 29).
Current source
information appears with its icon.
• Ex.: Station name (PS)/Station Frequency
Cursor
08-14_KD-SHX701_f.p65 4/1/04, 1:16 PM9
To Next Page
Loading...
Need help?
General
