- 17 -
The monitor must be grounded.
Failure to do so could cause electric shock. When using a 2P plug, ground
the monitor before plugging into a wall outlet. To remove the grounding
cable, unplug the monitor rst.
Follow the instructions below in handling the power plug.
• Hold the plug when unplugging.
Pulling the cord could cause damage and result in re or electric shock.
• Do not plug/unplug with wet hands.
It could cause electric re.
• Dust the plug periodically and keep it dust-free to avoid re or
electric shock.
• Do not overload wall outlets.
It could cause re or electric shock.
• Do not put things around the monitor.
Keep enough space around for easy access to the plug.
Turn o and unplug the monitor and its peripheral devices when
installing, uninstalling, and/or moving the monitor.
It could cause the monitor to fail and cause re or electric shock.
This monitor and its components come in plastic bags.
Keep out of reach of children.
Playing with plastic bags could cause suocation.
Caution
Install the monitor indoors.
It is not designed for the use outdoors or aboard vehicles.
Do not put the monitor in a stuy, dusty, humid place.
Do not expose it to oily smoke or steam.
It could cause the monitor to fail and cause re or electric shock.
Do not put the monitor on an unstable surface.
It could cause the monitor to fall and result in injury.
Do not expose the monitor to direct sunlight.
It could damage the cabinet or other parts and result in overheat or re.
Avoid a place subject to
• Magnetic elds • Vibrations
• Corrosive gases • Electrostatic charge
It could cause the monitor to fail.
Do not use the monitor with condensation on the surface.
It could cause the monitor to fail. Condensation forms when the monitor is
moved into a warm room from a cold place. Let it sit until it goes away.
To Next Page
Loading...
Need help?
General