Adjusting Movies for Increased Detail and
Sharpness (Multiple Pixel Control)
The new image-processing algorithm developed by JVC helps to create a natural impression that is sharper at areas
in
focus, and softer at areas that are not in focus, enabling you to enjoy highly expressive images with a greater sense
of depth.
1
Press the [MPC] button to display the adjustment menu
0
The setting can also be configured by selecting “Picture Adjust” " “MPC/e-shift” k, “MPC Level” u q
from the menu.
0
0
0
HIDE
Off
Standard
Reset
NR
Smoothing
Enhance
8K e-shift
Graphic Mode
MPC/e-shift
Before
2
Make adjustments according to your preference based on the setting of the selected
“Picture Mode”
* The factory setting varies with the “Picture Mode”.
Item Setting Description
8K e-shift k Off / On Toggles the e-shift display to on or off.
Graphic Mode Standard / High-res Switches the MPC setting.
It
is recommended that this item be configured to Standard such
as when viewing normal Blu-ray contents, and to “High-res”
such as when viewing 4K resolution contents.
Enhance 0 to 10 Enhances the sharpness of the image.
Smoothing 0 to 10 Enhances the blurriness of the image for a softer effect.
NR 0 to 10 For reducing the noise of the video image.
0
By increasing the setting range, you can expect enhanced effects.
3
Press the [MENU] button to exit
Toggling between the States before and during Adjustment
Pressing the [HIDE] button on the remote control enables you to toggle between the states before adjustment and
during adjustment.
35
Adjust/Set
To Next Page
Loading...
