11
Getting Started Preparation Basic Operation Settings Troubleshooting Others
ENGLISH
Light on (Red):
Warning mode (pP37)
Light on/Blinking (Orange):
Lamp warning (pP37)
To turn on/off the power
To hide the image temporarily (pP21)
To return to the previous menu
To switch input
(pP20)
To display the menu
(pP24)
Light on (Red):
Standby mode
Light on (Green):
During projection
Blinking (Green):
Image is temporarily hidden
(pP21)
Blinking (Red):
Cool Down mode (pP21)
To select or confirm
Air Inlets/Filter (pP41)
To adjust the position of the image (pP19)
Feet:
The height (0 - 5 mm) can be adjusted by turning the foot.
Bottom Surface
DLA-RS1_EN.book Page 11 Wednesday, January 24, 2007 9:23 AM
Downloaded From projector-manual.com JVC Manuals
To Next Page
Loading...
