Viewing 3D Movies
1
Connect this unit to a 3D-compatible
HDMI device, and turn on the power
to play back the 3D video image
0
For
details on how to play back 3D video images,
please refer to the instruction manual of the
player or recorder in use.
0
When
3D signals are received, the video image
switches automatically to the 3D format.
0
This unit supports the following 3D formats.
- Frame packing
- Side-by-side
- Top-and-bottom
0
In
the default setting, “3D Format” is set to “Auto”
for automatic projection of 3D images.
If the image does not switch to 3D automatically
A
Select “3D Format”
.
PICTURE MODE
FILM CINEMA ANIME.
NATURAL
THX USER
ADVANCED
MENU
3D
FORMAT
PIC.
ADJ.
COLOR
TEMP.
GAMMA
P.ANALYZER
MPC
3D
FORMAT
0
Pressing the [3D FORMAT] button each time
switches the mode in the following sequence:
“Auto” " “Side by Side” " “Top and Bottom” "
“2D” " “Auto”...
0
You can also perform setting from “Input
Signal”"“3D Setting”"“3D Format” in the
menu.
Format Description
Auto The format is detected and
configured automatically.
Side by Side Select this setting if the 3D input
signal is of the side-by-side
format.
Top and Bottom Select this setting if the 3D input
signal is of the top-and-bottom
format.
2D Select this setting if 2D images
are falsely recognized as 3D
ones.
* If a signal cannot be displayed as 3D image,
selecting the format does not switch the signal
to a 3D image.
For more information on possible input signals,
please refer to (
“Types of Possible Input
Signals”P. 73).
2
Turn of the power of the 3D GLASSES
and put them on
0
The PK-AG1 powers on automatically.
Adjusting 3D Movies
3D video images may appear differently to different
viewers. It may also be affected by your physical
condition at the time of viewing.
You are therefore recommended to adjust the video
images accordingly.
1
Select “Input Signal”"“3D Setting”
from the menu
Adjusting parallax (Parallax)
Adjust the displacement of the image for the left
and right eyes separately to obtain the best 3D
effect.
0
To do so, use the H I keys to move the cursor.
0
Setting range: -15 to +15
Adjusting crosstalk (Crosstalk Cancel)
Double images (overlapping of the left image with
the one on the right or vice versa) can be reduced
to deliver a clear quality.
0
To do so, use the H I keys to move the cursor.
0
Setting range: -8 to +8
2
Press the [MENU] button to exit
29
Operate
To Next Page
Loading...
Need help?
General
