EasyManuals Logo

JVC DR-MX1S User Manual

JVC DR-MX1S
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Masterpage:Right0
EN 27
Filename [MX1S_06DVD Operation.fm]
Page 27Saturday, 30 October 2004 16:18
BASIC OPERATIONS ON DVD DECK
To play back an MP3/JPEG disc, see “Playback With MP3/WMA/
JPEG Navigation” ( pg. 69).
1 Load a disc.
For details, refer to “Placing A Disc” ( pg. 10).
Pressing 4 also closes the disc tray.
Playback begins automatically if an auto-playback DVD disc is
loaded.
2 Press VHS/HDD/DVD SELECT on the unit repeatedly or DVD
on the remote so that the DVD lamp lights up on the unit.
3 Press 4 to start playback.
If you load a DVD disc whose region code does not match the unit,
“REGION CODE ERROR” appears on the TV screen. For details,
refer to “Region Number” ( pg. 8).
If “CAN NOT PLAY BACK DISC UNDER CURRENT SETTING”
appears on the TV screen, refer to “Parental Lock” ( pg. 40).
With Video CD/SVCD discs with PBC control or some DVD discs, the
menu display may appear on the TV screen after starting playback.
In this case, select an item which you want to play back from the
menu. Otherwise, the playback cannot go forward. Refer to
“Playback Control (PBC) Function” ( pg. 31) or “Locating A Desired
Scene Using The DVD Menu” ( pg. 28).
The Library Database Navigation also enables you to search and
select the desired titles. ( pg. 64)
4 Press 9 to pause playback.
To resume normal playback, press 4.
5 Press 8 to stop playback.
When a recordable disc is played, playback stops and a program
received with the units tuner resumes on the TV screen.
When a playback-only disc is played, playback stops and the still
image at the time you press 8 remains on the TV screen. Pressing 8
again resumes a program received with the units tuner.
If x is pressed during playback, playback stops, then the disc tray
opens.
NOTES:
When the Library Database Navigation screen appears, choose a
thumbnail image of the desired title on the TV screen, then press
ENTER. ( pg. 64)
It is not possible to playback the DVD disc recorded in 96 kHz on
DVD during recording or Live Memory Playback on HDD.
Basic Playback
Turn on the unit.
Turn on the TV and select the video channel (or AV mode).
Slide the TV/CABLE/DBS/DVD switch to DVD.
A
TTENTION:
It takes approximately 30 seconds to read a disc depending on the
type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take
several minutes when a disc is dirty, scratched or warped.
It may take a few seconds to start playback. This is not a
malfunction.
Forward/reverse high-speed search and other operations cannot
be performed while playback is stopped.
VHS/HDD/DVD
SELECT
8
x 4
9
ENTER
9
DVD
8
4
CABLE/DBS
DVDTV
MX1S_00.book Page 27 Saturday, October 30, 2004 4:18 PM

Table of Contents

Other manuals for JVC DR-MX1S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC DR-MX1S and is the answer not in the manual?

JVC DR-MX1S Specifications

General IconGeneral
BrandJVC
ModelDR-MX1S
CategoryDVD VCR Combo
LanguageEnglish

Related product manuals