JVC DT-V1710CG - Dimensions

Unit : mm
< Side View >< Front View >
<Front View with the wide mask attached>
331
336
288
395
183
334
254
VOLUME
SLOT 1
A
B
DEGAUSS
MENU
MUTIN G
SCREEN S
CHEC K
ASPECT
AREA
MARKER
UNDE R
SCAN
PULS E
CROS S
COLO R
OF F
SLOT 2
C
D
SLOT 3
POWER
E
F
INPUT SELECT
VOLUME
SLOT 1
A
B
DEGAUSS
MENU
MUTING
SCREENS
CHECK
ASPECT
AREA
MARKER
UNDER
SCAN
PULSE
CROSS
COLOR
OFF
SLOT 2
C
D
SLOT 3
POWER
E
F
INPUT SELECT
466.5
454
415
286
68
2
5
1.5
DIMENSIONS
(No. 52152) 1-75
Type
Picture Tube
Effective Screen Size
Input Signal Frequency
Video Band
Horizontal Resolution
Compliant Video Signal
Input Terminals
Remote Inputs
Audio Output
Environmental Conditions
Power Requirements
Power Consumption
Dimensions (W × H × D)
Mass
Accessory
SPECIFICATIONS
Items Contents
1-2 (No. 52152)
Multi-format monitor
17” Flat
33cm(13”) × 25cm(9-7/8”) / 41cm(16-1/4”) [measured diagonally]
Horizontal : 15kHz/27kHz – 45kHz
Vertical : 50Hz – 80Hz
Component : 25MHz (-3dB)
Video (Y/C) : 8MHz (-3dB)
1080/60i : 800 TV lines
Video (Y/C) : 600 TV lines
NTSC (3.58 MHz)/PAL (4.43 MHz) (using the IF-C01PNG)
480i/576i/480p/576p/1080i (50 Hz/60 Hz/24psF)/720p (50 Hz/60 Hz) (using the IF-
C01COMG)
D1 serial digital (using the IF-C01SDG)
HD serial digital (using the IF-C12HSDG)
Installing an optional input card in SLOT1, 2, or 3 is required.
INPUT A/INPUT B : Terminals on the input card in SLOT1.
INPUT C/INPUT D : Terminals on the input card in SLOT2.
INPUT E/INPUT F : Terminals on the input card in SLOT3.
Point-of-contact connection, 1 line, D-sub connector (15-pin 3-line)
Serial connection, 1 line, D-sub connector (9-pin), compliant to RS-485
1W (monaural) 3-1/8” (8cm) round speaker ×1
Operating Temperature : 5°C – 35°C (41°F – 95°F)
Operating humidity : 20% – 80% (non-condensing)
120V/230V, 50Hz/60Hz
1.56A/0.9A (including input card)
39.5cm(15-5/8”) × 33.4cm(13-1/4”) × 46.7cm(18-3/8”)
(not including wide mask and input card)
23.7 kg (not including wide mask and input card)
AC power cord (2.5 m) x1
Power cord holder x 1 (case and cover)
Screws x 2 (Power cord holder)
Wide Mask x 1
Screws x 4 (Wide Mask)
NOTE : Design and specifications subject to change without notice.