0
Everio MediaBrowser uses a calendar
based interface that makes it easy to find
any video you have recorded by selecting
the appropriate date.
.
USB Menu Operations
By connecting a USB cable between this
unit and your computer, you can perform
operations such as file backups to PC/disc
or file uploads to file-sharing site using your
computer.
Preparation:
0
Install the Everio MediaBrowser software
onto the PC.
0
Close the LCD monitor to turn off the
camera. Disconnect the power supply.
1
Open the LCD monitor to connect
to the PC with the USB cable.
0
Reconnect the power supply to turn on
the camera.
2
The “SELECT DEVICE” menu
appears.
Select “CONNECT TO PC” and
press OK.
.
CONNECT TO PC
TYPE TO CONNECT
SELECT DEVICE
SELECT DEVICE
0
Select “CONNECT TO OTHER” if the
camera is connected to a device other
than a computer.
0
To select/move cursor towards up/left
or down/right, press the button UP/< or
DOWN/>.
3
The “CONNECT TO PC” menu
appears.
Select an option that best suits your
needs and press OK.
.
PLAYBACK ON PC
CONNECT TO PC
0
To select/move cursor towards up/left
or down/right, press the button UP/< or
DOWN/>.
Option Usage
PLAYBACK
ON PC
0
To play back your
recordings on the PC.
0
To back up your
recordings on the PC
without using the provided
software.
CREATE
DISC
0
To save your recordings
on a disc.
DIRECT
DISC
0
To save all unsaved
recordings on a disc.
UPLOAD
0
To upload videos to file-
sharing sites.
BACK UP
0
To back up recordings on
the PC.
For detailed operations on the above
options, refer to the other sections in this
guide or the “Detailed User Guide”.
13
To Next Page
Loading...
Need help?
General