41
ENGLISH
To Extract a Still Image File from a
Video File – ! mode only
You can extract the desired scene from a
recorded video fi le, and store it as a still
image fi le.
Preparation:
•
Slide the power/mode switch to MODE to
select
!
mode.
•
Press the PLAY/REC button to select
playback mode.
1 Select the desired video fi le.
Select
Set
VIDEO
8/8
SELECT
SET SORT
Playback starts. Search the desired scene.
2
SNAP
SHOT
NOTES
•
Extracted still images are stored at a
resolution of 1920 x 1080. The image can
be elongated in the horizontal or vertical
directions depending on the picture quality
of the source video fi le.
•
Images cannot be extracted when the video
fi le is in search or slow-motion playback.
Extract images when the video is in normal
playback, or when it is paused.
•
The continuous shooting function ( pg. 68)
cannot be used to extract images.
DPOF Print Setting –
#
mode only
The number of prints to make of a still image
recorded on an SD card can be set. This
feature is useful when taking the SD card to a
photo lab for printing.
Preparation:
•
Slide the power/mode switch to MODE to
select
#
mode.
•
Press the PLAY/REC button to select
playback mode.
•
Set [REC MEDIA FOR IMAGE] to [SD].
( pg. 68)
1
FUNCTION
EFFECT
DPOF
MOVE
COPY
PROTECT
DELETE
2 Select [DPOF].
Select
Set
DPOF
CHECK SETTINGS
RESET
ALL 1
SELECT IMAGES
SELECT
SET QUIT
Setting Files Individually
After performing steps 1-2
3 Select [SELECT IMAGES].
Select
Set
DPOF TOTAL: 0
8/8
SELECT
SET QUIT
4 Select the desired fi le.
Select
Set
If you slide and hold the zoom lever
towards T, the preview screen of the still
image is displayed.
Continued on next page
To Next Page
Loading...
Need help?
General