JVC Everio GZ-HD3 - Creating Discs;Editing Files on PC

59
ENGLISH
Creating Discs/Editing Files
Preparation:
•
Install the software from the included CD-
ROM. ( pg. 53)
•
Connect the camera to the PC with the USB
cable. ( pg. 55)
1 Set the camera’s power/mode switch
to ON.
SELECT
SET
BACK UP
PLAYBACK ON PC
QUIT
2 On the camera, move the set lever to
¡
/
¢
to select [PLAYBACK ON PC],
then press down.
A dialog box is displayed on the PC
screen. However, you do not need to
use the dialog box. PowerCinema starts
automatically.
3 Click [Copy/Edit].
4 Click the media that contains desired
fi les.
5 Click the check box of the desired
fi le.
The
s
mark appears in the check box.
To select other fi les, repeat this step.
Continued on next page