.
4
Activate WPS on the smartphone (or computer) within 2 minutes.
(Operation on the smartphone (or computer))
0
To activate WPS, refer to the instruction manual of the device in use.
5
A connection is established and Q appears on the camera’s screen.
.
o
Search and Connect
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “DIRECT MONITORING” (
S
) in the shortcut menu.
(Operation on this camera)
.
3
Check the SSID and PASS shown on the camera’s screen, then add the
smartphone (or computer) to connect.
(Operation on the smartphone (or computer))
.
0
For details on connecting your smartphone (or computer) to a Wi-Fi
network, please refer to the instruction manual of the phone terminal
in use.
4
A connection is established and Q appears on the camera’s screen.
.
Using Wi-Fi
14
To Next Page
Loading...
