JVC GR-DA30AA User Manual

12 EN
Getting Started
MAX TIME
115min
LEVEL
0
50
100%
BATTERY CONDITION
LANGUAGE
ENGLISH
1 Select
2 SET
2007. 01. 06
1 Select
2 SET
Data Battery System
You can check the remaining battery power
and the recordable time.
1
1 Set the Power Switch to “REC” or “PLAY”
( 9).
2
2 Press DATA, and the battery status screen
appears.
• Press DATA again to return to the normal
screen.
• Data battery status cannot be displayed
during playback or while recording is in
progress.
• If “COMMUNICATION ERROR” appears
instead of the battery status even though
you tried to press DATA several times, there
may be a problem with your battery. In such
a case, consult your nearest JVC dealer.
Using AC Power
Perform step
4
4
in “Charging The Battery Pack”
( 11).
Language Settings
The language on the display can be changed
( 22).
1
1 Set the Power Switch to “REC” or “PLAY”.
• If set to “REC”, the recording mode should
be set to “ M” ( 9).
2 Press MENU.
3 Select “SYSTEM”, press SET or ¤.
4 Select “LANGUAGE”, press SET or ¤.
5
5 Select the desired language, press SET or
¤.
6
6 Press MENU.
Press £ whenever you want to return to the
previous menu screen.
Date/Time Settings
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
( 21, 23).
Perform steps
1
–
2
2
in “Language Settings”
( 12).
1 Select “DISPLAY”, press SET or ¤.
2 Select “CLOCK ADJ.”, press SET or ¤.
3
3 Select the desired date display format,
press SET or ¤.
• Repeat this step to input time display
format (Select from “24h” or “12h”), month,
date, year, hour and minutes.
4
4 Press MENU.
Press £ whenever you want to return to the
previous menu screen/setting.
2
3
4
1
2
GR-DA30AA_EN.indb 12GR-DA30AA_EN.indb 12 7/9/2007 12:03:18 PM7/9/2007 12:03:18 PM

JVC GR-DA30AA Specifications

General

Brand	JVC
Model	GR-DA30AA
Category	Camcorder
Language	English