87
FEATURES OF THE CAMERA SECTION
Using the Skin Detail Function
To use the skin detail function set on the SKIN COLOR
ADJUST screen, select “ON” for the SKIN DETECT item on
the CAMERA PROCESS [1/2] menu screen.
In addition, you can use the LEVEL item to set three levels of
suppression of skin color area detail enhancement in the
video signal. X See page 67.
While the skin detail function operates, the “SD” indicator is
displayed on the STATUS 0 and STATUS 1 screen in the
viewfinder or LCD monitor.
Confirming the color tone area adjusted
with the Skin Detail function
When you push the ZEBRA switch on the front panel to “SKIN
AREA”, the skin detail function turns ON, and the color area
adjusted with the skin detail function is displayed in color in
the LCD monitor or viewfinder.
MEMO
When COLOR GAIN item on the ADVANCED PROCESS
menu screen is set to “OFF”, only the portion the skin detail
function is working is displayed in skin color.
X See page 69.
STATUS 0
ZEBRA switch
“SD” display
To Next Page
Loading...
Need help?
General
