JVC GY-HM70 Basic User's Guide

Charging the Battery Pack
.
TT.1 BATT.2
REMOTE
AV
DC
Charging finished:
Goes out
Set the “STANDBY/ON
OFF” switch to “OFF”.
Attach the battery pack.
Align the terminal of the
battery pack with this unit.
Either BATT.1 or BATT.2 can be charged.
If two battery packs are attached, BATT.1 is charged first. After the charging of
BATT.1 is completed, BATT.2 is charged. However, if BATT.1 is attached while
BATT.2 is being charged, BATT.1 will be charged after the charging of BATT.2 is
completed. Both battery packs cannot be charged at the same time.
Connect the DC connector and
plug in the power.
Charging Lamp1, 2
Charging in progress:
Blinks
0
The battery pack is not charged at the time of purchase.
0
To detach the battery
pack, press the battery lock release button, and slide the battery
pack out of this unit.
.
8

JVC GY-HM70 Specifications

General

Brand	JVC
Model	GY-HM70
Category	Camcorder
Language	English