EasyManuals Logo

JVC KD-BT11 User Manual

JVC KD-BT11
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #150 background imageLoading...
Page #150 background image
ENGLISH
24
Playing a CD-R or CD-RW
Use only “finalized” CD-Rs or CD-RWs.
This unit can only play back files of the same type as
those detected first if a disc includes both audio CD
(CD-DA) files and MP3/WMA files.
This unit can play back multi-session discs; however,
unclosed sessions will be skipped while playing.
Some CD-Rs or CD-RWs may not play back on this
unit because of their disc characteristics, or for the
following reasons:
Discs are dirty or scratched.
Moisture condensation has occurred on the lens
inside the unit.
The pickup lens inside the unit is dirty.
The files on the CD-R/CD-RW are written using the
“Packet Write” method.
There are improper recording conditions (missing
data, etc.) or media conditions (stained, scratched,
warped, etc.).
CD-RWs may require a longer readout time since the
reflectance of CD-RWs is lower than that of regular
CDs.
Do not use the following CD-Rs or CD-RWs:
Discs with stickers, labels, or a protective seal stuck
to the surface.
Discs on which labels can be directly printed by an
ink jet printer.
Using these discs under high temperature or high
humidity may cause malfunctions or damage to the
unit.
Playing an MP3/WMA disc
This unit can play back MP3/WMA files with the
extension code <.mp3> or <.wma> (regardless of
the letter case—upper/lower).
This unit can show the names of albums, artists
(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or
2.4) for MP3 files and for WMA files.
This unit can display only one-byte characters. No
other characters can be correctly displayed.
This unit can play back MP3/WMA files meeting the
conditions below:
Bit rate of MP3: 32 kbps — 320 kbps
Sampling frequency of MP3:
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
Bit rate of WMA:
32 kbps — 192 kbps
Disc format: ISO 9660 Level 1/Level 2, Romeo,
Joliet, Windows long file name
The maximum number of characters for file/folder
names vary depending on the disc format used
(includes 4 extension characters—<.mp3> or
<.wma>).
ISO 9660 Level 1: up to 12 characters
ISO 9660 Level 2: up to 31 characters
Romeo *: up to 128 characters
Joliet *: up to 64 characters
Windows long file name *: up to 128 characters
* The parenthetic figure is the maximum number of
characters for file/folder names in case the total
number of files and folders is 271 or more.
This unit can recognize a total of 512 files,
200 folders, and 8 hierarchical levels.
This unit can play back files recorded in VBR (variable
bit rate).
Files recorded in VBR have a discrepancy in the
elapsed time display, and do not show the actual
elapsed time. In particular, this difference becomes
noticeable after performing the search function.
This unit cannot play back the following files:
MP3 files encoded in MP3i and MP3 PRO format.
MP3 files encoded in an inappropriate format.
MP3 files encoded with Layer 1/2.
WMA files encoded in lossless, professional, and
voice format.
WMA files which are not based upon Windows
Media ® Audio.
WMA files copy-protected with DRM.
Files which have data such as AIFF, ATRAC3, etc.
The search function works but search speed is not
constant.
EN24-29_KD-BT11[EE]_3.indd 24EN24-29_KD-BT11[EE]_3.indd 24 11/30/07 4:41:54 PM11/30/07 4:41:54 PM

Table of Contents

Other manuals for JVC KD-BT11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-BT11 and is the answer not in the manual?

JVC KD-BT11 Specifications

General IconGeneral
MP3 playbackYes
DVD Audio playbackNo
FM band range87.5 - 108 MHz
LW band range144 - 279 kHz
Output power50 W
Frequency range16 - 20000 Hz
Audio output channels4.0 channels
Signal-to-Noise Ratio (SNR)98 dB
File typeMP3/WMA
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)182 x 52 x 159.5 mm

Related product manuals