4
GETTING STARTED
Cancel the demonstration
1
Pressandhold
MENU
.
2
Pressthevolumeknobtoselect
[DEMO]
.
3
Turnthevolumeknobtoselect
[DEMO OFF]
,thenpresstheknob.
4
Press
MENU
toexit.
Set the clock
1
Pressandhold
MENU
.
2
Turnthevolumeknobtoselect
[CLOCK]
,thenpresstheknob.
3
Turnthevolumeknobtoselect
[CLOCK SET]
,thenpresstheknob.
4
Turnthevolumeknobtoselecttheday,thenpresstheknob.
5
Turnthevolumeknobtoadjustthehour,thenpresstheknob.
6
Turnthevolumeknobtoadjusttheminute,thenpresstheknob.
7
Turnthevolumeknobtoselect
[24H/12H]
,thenpresstheknob.
8
Turnthevolumeknobtoselect
[24 HOUR]
or
[12 HOUR]
thenpress
theknob.
9
Press
MENU
toexit.
Set the basic settings
1
Pressandhold
MENU
.
2
Turnthevolumeknobtomakeaselection,thenpresstheknob.
• Seethefollowingtableforselection.
3
Press
MENU
toexit.
Toreturntotheprevioushierarchy,press
G
T/P
.
1
2
3
Default:
XX
CLOCK
CLOCK ADJ
AUTO: The clock time is automatically set using the Clock Time (CT) data in DAB signal. ;
OFF: Cancels.
DIMMER
DIMMER SET
Selects the display and button illumination adjusted in the [BRIGHTNESS] setting.
AUTO: Changes between the day and night adjustments when you turn off or on the car
headlights. *
1
; ON: Selects the night adjustments. ; OFF: Selects the day adjustments.
BRIGHTNESS
Sets the display and button brightness for day and night separately.
1
DAY/ NIGHT: Select day or night.
2
BUTTON ZONE/ DISP ZONE: Select the zone for setting.
3
Set the brightness level (00 to 31).
(Default: BUTTON ZONE: DAY: 31 ; NIGHT: 11 / DISP ZONE: DAY: 31 ; NIGHT: 11)
DISPLAY
SCROLL
*
2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second
intervals. ; OFF: Cancels.
TAG DISPLAY
ON: Shows the TAG information while playing MP3/WMA/AAC files. ; OFF: Cancels.
IPOD SWITCH
*
3
HEAD MODE: Controls music playback only from this unit. ;
IPOD MODE: Controls music playback from both the unit and iPod/iPhone. ;
EXT MODE: Controls music playback only from the iPod/iPhone.
SRC SELECT
AM
*
4
ON: Enables AM in source selection. ; OFF: Disables.
AUX
*
4
ON: Enables AUX in source selection. ; OFF: Disables. ; BT ADAPTER: Select when the
KS-BTA100 Bluetooth adapter is connected to the AUX jack (
➜
9). The source name will
change to BT AUDIO.
*
1
Theilluminationcontrolwireconnectionisrequired.
(
➜
15)
*
2
Somecharactersorsymbolswillnotbeshowncorrectly(orwillbeblanked).
*
3
DisplayedonlywhenthesourceisUSB‑IPOD.
*
4
Notdisplayedwhenthecorrespondingsourceisselected.
LVT2423-001A_KD-DB53_English.indd 4 12/12/21 9:12