JVC KD-Lh401 - LOCATION OF THE BUTTONS; Control panel; Illumination Navigation for easy operations

ENGLISH
4
LOCATION OF THE BUTTONS
Control panel
Illumination Navigation for easy operations
If you use M MODE or SEL (select), the display and some controls (such as the number buttons,
4 /¢ , 5/∞, and control dial) enter the corresponding control mode, then the controls
start flashing to lead you to the next operational steps. (Illumination Navigation)
• The display shows how these buttons function during this period.
Ex.: When you press number button 1 after pressing M MODE, to operate the FM tuner.
To use these controls for original functions again, wait until the controls stop flashing without
using these controls.
• Pressing M MODE again also restores original functions. However, pressing SEL (select) makes
the unit enters a different mode.
Time countdown indicator
1 Control dial
2 (standby/on attenuator) button
3 TP/PTY (traffic programme/programme type)
button
4 Display window
5 5 (up) button
6 FM/AM DAB button
7 0 (eject) button
(angle) button
8 4 /¢ buttons
9 SEL (select) button
p D DISP (display) button
q Number buttons
w M MODE button
e Remote sensor
r ∞ (down) button
t CD/CD-CH (CD changer) button
y (control panel release) button
12 3 4 56 8
9p q we y
tr
7
EN04-06_KD-LH401[E_EX]f.p65 30/1/04, 5:24 PM4