30
ENGLISH
Indications Selectable settings, [reference page]
LCD Type
Display type
Auto: [Initial]; Positive pattern will be selected during the day
time*
1
; while negative pattern will be used during the night
time*
1
.
Positive: Positive pattern of the display.
Negative: Negative pattern of the display (except still images and
animations).
Font Type
Font type
You can select the font type on the display.
1 [Initial] O 2
ID3 Tag
Tag display
On: [Initial]; To shows the ID3 tag display while playing MP3/WMA
tracks, [13, 14].
Off: Cancels.
Theme
Audio level meter
You can select the level meter during playback.
SRC Anime (Source Animation) [Initial] O Meter 1 O Meter 2 O
Meter 3 O (back to the beginning)
• Press DISP repeatedly to show the selected level meter.
IF Filter
Intermediate
frequency filter
Auto: [Initial]; Increases the tuner selectivity to reduce interference
noises between the stations. (Stereo effect will also be lost.)
Wide: Subject to the interference noises from adjacent stations, but
sound quality will not be degraded and remaining the stereo
effect.
AreaChange
Tuner channel
interval
EU:
Select this when using the receiver in an area other than North and
South America. (FM: 50 kHz—manual tuning, 100 kHz—auto
search; AM: 9 kHz)
US: [Initial]; Select this when using the receiver in North or South
America. (FM: 200 kHz; AM: 10 kHz)
*
1
Depends on the “Dimmer” setting.
EN26-31_KD-AR860[J]f.indd 30EN26-31_KD-AR860[J]f.indd 30 12/17/04 5:42:26 PM12/17/04 5:42:26 PM
To Next Page
Loading...
