5
ENGLISH
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 21.
1
Turn on the power.
“HELLO” appears on the display.
2
Select the source.
To operate the tuner, see pages 6 – 10.
To operate the CD player, see pages 11 – 15.
To operate the CD changer, see pages 33 – 35.
To operate the external component, see page 36.
3
Adjust the volume.
4
Adjust the sound as you want (see pages 16 – 20).
To drop the volume in a moment
Press briefly while listening to any source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press for more than 1 second. “SEE YOU” appears, then the unit turns off.
1
3
2
/I
ATT
/
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
CAUTION on Volume Setting
CDs produces very little noise compared with other sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged by the sudden increase in the output level.
Therefore, lower the volume before playing a CD and adjust it as required during playback.
CD
CD-CH
FM/AM
Volume level appears
Volume level indicator
EN02-05.KD-SX950[J]/F 99.12.13, 1:10 PM5
To Next Page
Loading...
Need help?
General
