16
ENGLISH
1
2
Equalization pattern indicator
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your preference.
1
Select the item you want to adjust.
Indication To do: Range
BAS Adjust the bass –06 (min.) — +06 (max.)
(Bass)
TRE Adjust the treble –06 (min.) — +06 (max.)
(Treble)
FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only)
(Fader)* balance
BAL Adjust the left and right speaker L06 (left only) — R06 (right only)
(Balance) balance
WOOFER Adjust the subwoofer output level 0 — 8
(Subwoofer)
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
Note:
* If you are using a two-speaker system, set the fader level to “00.”
2
Adjust the level.
Note:
Normally the control dial works as the volume control. So you do not have to select “VOL” to
adjust the volume level.
Equalization pattern changes as you adjust the bass or treble.
EN16-20.KD-SX950[J]/F 99.12.13, 1:13 PM16
To Next Page
Loading...
Need help?
General
