10
ENGLISH
Scanning broadcast stations
When you press RPT/SCAN (Repeat/Scan) while listening to the radio, station scanning starts.
Each time a broadcast is tuned in, scanning stops for about 5 seconds (“SCAN” flashes on
the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The MONO
indicator lights up on the display.
The sound you hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
When using this unit in an area other than North or South America:
You need to change the AM/FM channel intervals. See “Changing the AM/FM channel
intervals” on page 29.
Other convenient tuner functions
MO/RND
RPT/SCAN
Lights up when receiving an FM broadcast in stereo.
MO
RND
EN06-10.KD-SX950[J]/F 99.12.13, 1:11 PM10
To Next Page
Loading...
