20
ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 18) to your preference and
store your own adjustments in memory.
SCM
1
2
Within
5 seconds
BBE
SCM
2
2
1,3
2
1
Call up the sound mode you want to adjust.
See page 18 for details.
2
To adjust the bass or treble level
1 Select “BAS” or “TRE.”
2 Adjust the bass or treble level.
To turn on or off the BBE
II
function
See page 17.
3
Press and hold SCM (Sound Control Memory)
until the sound mode you have selected
flashes on the display.
Your setting is stored in memory.
4
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 18.
Within
5 seconds
Within
5 seconds
EN16-20.KD-SX950[J]/F 99.12.13, 1:13 PM20
To Next Page
Loading...
Need help?
General
