36
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See “Selecting the external component to use” on page 29.)
1
Select the external component.
• If “LINE IN”* does not appear on the display, see page 29
and select the external input (“LINE IN”).
2
Turn on the connected component and start playing the
source.
3
Adjust the volume.
3
1
* Displayed only when one of the following sources is selected
— FM, AM and CD.
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
to turn on the power.
Using a subwoofer
By connecting a subwoofer to the SUB WOOFER plugs on the rear, you can enjoy enhanced
bass sounds and a more realistic theater atmosphere in your car.
• Refer also to the instructions supplied with your subwoofer.
To set the subwoofer cutoff frequency, refer to “Selecting the subwoofer cutoff frequency” on
page 28.
To adjust the subwoofer output volume, refer to “Adjusting the sound” on page 16.
CD
-CH
EN36-36.KD-SX950[J]/F 99.12.13, 1:19 PM36
To Next Page
Loading...
Need help?
General
