16
ENGLISH
MP3 OPERATIONS
200
Refer also to “CD OPERATIONS” on pages 11 to
13.
Playing an MP3 disc
1
Open the control panel.
2
Insert an MP3 disc into the loading slot.
The unit draws the
disc.
Playback starts
automatically from the
first file of the first
directory once disc
check is completed.
3
Close the panel by hand.
Notes:
• All the files on the disc will be played repeatedly
until you stop playback—All File Repeat Play.
• MP3 discs require a longer readout time.
(It differs due to the complexity of the directory/file
configuration.)
• If you change the source or turn the power off,
MP3 playback stops (without ejecting the disc).
Next time you select disc play as the source or turn
the power on, MP3 playback starts from where
playback has been stopped previously.
The display changes to show the following:
Ex.: When the disc contains 19 directories and 38
MP3 files.
CD–in indicator lights up
EN14-20.KD-SX980[J]f.pm5 7/1/02, 5:26 PM16
To Next Page
Loading...
Need help?
General
