JVC KD-SX980 User Manual

8
ENGLISH
RADIO BASIC OPERATIONS
200
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1 Select the band (FM1 – 3, AM).
* When “CLOCK” is set to “ON” (see page 26),
the band indication will soon change to the
clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2 Start searching a station.
Selected band appears.
While searching stations, “SEEK” appears
on the display.
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1 Select the band (FM1 – 3, AM.)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2 Press and hold ¢ or 4 until
“MANU (manual)” starts flashing on
the display.
FM1 FM2 FM3 AM
(F1) (F2) (F3) (AM)
FM1 FM2 FM3 AM
(F1) (F2) (F3) (AM)
Press ¢ to search
stations of higher
frequencies.
Press 4 to search
stations of lower
frequencies.
Selected band appears.*
EN08-10.KD-SX980[J]f.pm5 7/1/02, 3:19 PM8

JVC KD-SX980 Specifications

General

Brand	JVC
Model	KD-SX980
Category	Car Receiver
Language	English