JVC KS-BTA200 - Page 14

14
ENGLISH
Bluetooth Connection
Registering a Bluetooth device — Pairing (continued)
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New Device.”
2 Display the menu, then select
“Bluetooth” ] “Search.”
The unit searches for the devices and displays the
list of the available devices.
3 Select a device name you want to
connect.
4 Enter the PIN (Personal Identification
Number) Code of the device to be
connected.
• Refer to the instruction manual supplied with
your receiver.
“Connected (and the device name)” appears
on the display.
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New Device.”
2 Press MODE, then select “Search.”
The unit searches for the devices and displays the
list of the available devices.
3 Select a device name you want to
connect.
To connect an available device from
the unit
Use “Search” to establish connection with a
Bluetooth device from the unit.
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞ to select “New Device.”
3 Display the menu, then select “Mode”
] “Search.”
The unit searches for the devices and displays the
list of the available devices.
4 Select a device name you want to
connect.
5 Press 4/¢ /5/∞ to enter the PIN
(Personal Identification Number) Code
of the device to be connected, then
select “Connect.”
4/¢/5/∞:
Select a number.
ENT:
Enter the number.
• Refer to the instruction manual supplied with
your receiver.
“Connected (and the device name)” appears
on the display.
KS-BTA200_book.indb 14KS-BTA200_book.indb 14 07.2.23 11:39:23 AM07.2.23 11:39:23 AM