31
Auto Connect
You can set to connect a Bluetooth device automatically
when the receiver is turned on.
Off: Does not connect any device automatically.
Last: Connects with the last connected device.
Order: Connects with the available registered
device found at first.
Auto Answer
You can set the receiver to receive or reject incoming
calls automatically.
Off: The receiver does not answer calls
automatically.
Answer the calls manually.
On: The receiver receives incoming calls
automatically.
Reject: The unit rejects all incoming calls.
Message Info
You can set the receiver to inform the arrival of the
message when you receive an SMS (Short Message
Service)/Text Message.
Auto: The receiver rings and informs you of the
arrival of the message.
Manual: The receiver does not inform you of the
arrival of the message.
Setting items
You can change the following items in Setting menu (_: initial):
Microphone Level / Mic Setting
Adjust a microphone volume.
Level: 1, 2 , 3
Version
Display the software and hardware versions.
Settings
KS-BTA200_book.indb 31KS-BTA200_book.indb 31 07.2.23 11:39:40 AM07.2.23 11:39:40 AM
To Next Page
Loading...
