JVC KS-BTA200 - Device Settings; Basic Procedure for Settings

30
ENGLISH
Other Settings
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Select “Mode” ] “Setup” from the
menu.
3 Select an item.
See “Setting items” on the next page.
4 Press the following buttons to change
the settings.
5/∞: Change the setting.
ENT: Confirm the setting.
for Type B
1 Display the menu, then select
“Bluetooth” ] “Settings”.
2 Select an item.
See “Setting items” on the next page.
3 Change the settings.
Refer to the instruction manual supplied with your
receiver.
Basic procedure
for Type C
1 Press MODE, then select “Settings.”
2 Select an item.
See “Setting items” on the next page.
3 Press the following buttons to change
the settings.
5/∞: Change the setting.
1: Confirm the setting.
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press ∞/4/¢ to select
“SETTINGS.”
2 Select an item.
See “Setting items” on the next page.
3 Press the following buttons to change
the settings.
VOLUME +/– (Control dial):
Change the setting.
∞: Confirm the setting.
KS-BTA200_book.indb 30KS-BTA200_book.indb 30 07.2.23 11:39:39 AM07.2.23 11:39:39 AM