JVC KS-BTA200 - Connecting and Disconnecting Devices

17
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select a registered device
you want to delete.
2 Press MODE, then select “Delete
Pair.”
3 Select “Yes” to delete the device.
• If you select “No,” the procedure is canceled.
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press 4/¢ to select a
registered device you want to delete.
2 Press ∞, then select “DELETE.”
3 Select “YES” to delete the device.
• If you select “NO,” the procedure is canceled.
Connection
Connecting/Disconnecting the
device
To connect a device manually
Only one device can be connected at a time for each
source (“Bluetooth Phone” and “Bluetooth Audio”).
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞ to select a registered
device.
3 Select “Mode” ] “Connect” to
connect a selected device.
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select a registered device.
2 Display the menu, then select
“Bluetooth” ] “Connect” to
connect a selected device.
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected
as the source, use 5/∞ to select a
registered device.
2 Press MODE, then select “Connect”
to connect a selected device.
KS-BTA200_book.indb 17KS-BTA200_book.indb 17 07.2.23 11:39:26 AM07.2.23 11:39:26 AM