JVC KS-BTA200 - Deleting Registered Devices

16
ENGLISH
Bluetooth Connection
To delete the registered device
You can register up to five Bluetooth devices.
If you want to connect a 6th device, delete one of the
registered devices.
for Type A
1 Display “Bluetooth Phone” screen
or select “Bluetooth Audio” as the
source.
2 Press 5/∞ to select a registered device
you want to delete.
3 Display the menu, then select “Mode”
] “Delete Pair.”
4 Select “Yes” to delete the device.
• If you select “No,” the procedure is canceled.
for Type B
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select a registered device
you want to delete.
2 Display the menu, then select
“Bluetooth” ] “Delete Pair.”
3 Select “Yes” to delete the device.
• If you select “No,” the procedure is canceled.
Registering a Bluetooth device — Pairing (continued)
for Type C
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, select “New device.”
2 Press MODE, then select “Special
Device.”
The list of special devices appears on the display.
3 Select a device name you want to
connect.
4 Connect the selected device using
“Open (page 13)”or “Search (page
14).”
for Type D
1 While “Bluetooth Phone” or
“Bluetooth Audio” is selected as
the source, press 4/¢ to select
“NEW.”
2 Press ∞, then select “SPECIAL.”
3 Select a device name you want to
connect.
4 Connect the selected device using
“OPEN (page 13)”or “SEARCH (page
14).”
KS-BTA200_book.indb 16KS-BTA200_book.indb 16 07.2.23 11:39:25 AM07.2.23 11:39:25 AM