JVC KS-BTA200 - Page 7

7
To adjust the microphone angle
Installing the microphone unit
1 Attach the microphone to the
microphone clip.
2 Install the microphone unit.
To install on the sun visor
To install on the steering column
Install the microphone unit on the top side of the
steering column.
Microphone
(supplied)
Microphone clip
(supplied)
To Interface
adapter unit
Double-sided adhesive
tape (supplied)
Introduction
Microphone unit (supplied)
microphone unit (supplied)
Secure the microphone cord using cord
clamps (not supplied) if necessary.
KS-BTA200_book.indb 7KS-BTA200_book.indb 7 07.2.23 11:39:15 AM07.2.23 11:39:15 AM