JVC KW-AV70BT - Using iPod;iPhone Apps; Starting an App on iPod Touch;iPhone

32
ENGLISH
• When you use an App of the iPod touch or iPhone,
see also page 70 for safety instructions.
Displaying the screen of App while
listening to other source
You can switch the display to screen of App (such as
MotionX-GPS Drive) from connected iPod touch/iPhone
while listening to other source.
Activating input of iPod touch/iPhone to
show buttons for switching display
• Make sure that “ AV Off ” is selected as the rear
source. ( page 41)
1 Turn off the AV source.
On <AV Menu> screen:
2 Display <Input> setting screen.
1 Start App on your iPod touch/iPhone.
2 Select “ Apps ” as the source.
On <AV Menu> screen:
• You can also play back the audio/video using iPod/
iPhone itself instead of the unit.
– You can operate for basic playback on the touch
panel.
Audio
Video
• When using MotionX-GPS Drive, operating buttons
and information are not shown. You can perform the
operations on the touch panel, such as scrolling the
map.
Using an App of iPod touch/iPhone
You can use an App of the connected iPod touch/iPhone on this unit.
• You can operate some functions of an App on the touch panel.
Preparation
• Connect the iPod touch/iPhone using KS-U30 (separately purchased). ( Installation/Connection Manual)
• Select <iPod> for <AV Input> setting. (page 28)
• For Apps you can use on this unit, visit <http://mobile.jvc.com>.
EN_KW-AV70JJW.indb 32 11/12/13 13:09