JVC KW-AV70BT - Adjusting the Volume; Monitor Panel Operations - Open;Tilt

9
ENGLISH
Adjusting the volume
To adjust the volume (00 to 50)
• On the source control screen, you can also adjust the
volume by moving your finger on the touch panel as
illustrated.
IncreaseDecrease
To attenuate the sound
The ATT indicator lights up.
To cancel the attenuation, press [
] again.
Caution on volume setting:
Digital devices (CD/SD /USB/iPod) produce very
little noise compared with other sources. Lower
the volume before playing these digital sources to
avoid damaging the speakers by sudden increase
of the output level.
Monitor panel operations —
Open/Tilt
1 On the source control screen:
2
[ Open]
Opens the monitor panel.
[
Eject] Ejects the disc.
[
Close]
Closes the monitor panel.
• Do not place your finger
behind the monitor panel.
[
Tilt +]
[
Tilt –]
Tilts the monitor panel.
[Detach] To detach the monitor panel.
( page 5)
[
]
Goes back to the current source
screen.
• When the ACC is off, you can also eject the disc. Hold
/MENU to display the <Open/Tilt> screen.
(Hold)
EN_KW-AV70JJW.indb 9 11/12/13 13:09