JVC KW-AV70BT - Input Settings

50
ENGLISH
Menu item Selectable setting/item Initial: Underlined
Display
Dimmer z Auto
z On
z Off
z Dimmer
Time Set
: Dims the screen and button illumination when you turn
on the headlights.
• The ILLUMI lead connection is required. (
Installation/Connection Manual)
: Activates dimmer.
: Cancels.
: Sets the Dimmer On (
)/Off ( ) times.
• Press [5] or [∞] to set the time.
Display Design Change the display design (background, text color and touch panel button
color). ( page 44)
OSD Clock
z On
z Off
: Displays the clock while a video source is played back.
: Cancels.
Demonstration
z On
z Off
: Activates the demonstration on the screen.
: Cancels.
Scroll
z Auto
z Once
z Off
: Repeats scrolling.
: Scrolls the displayed information once.
: Cancels.
• Touching an information bar scrolls the text regardless of this setting.
GUI Adjust Adjust the brightness and blackness of the screen.
Press [Enter] to display the setting screen, select Dimmer On ( )/Off ( ),
then change the following settings:
z Brightness
z Black
: Adjusts brightness (–15 to +15; Initial 00 for Dimmer
On/+15 for Dimmer Off).
: Adjusts blackness (–15 to +15; Initial 00).
NTSC/PAL
Select the color system of the external monitor.
z NTSC, PAL
Display Sensor Change the settings of how to display the buttons, the sensitivity of the
motion sensor, and how the screen is changed when no operation is
performed for a while. ( page 11)
Input
AV Input*
1
*
2
You can determine the use of LINE IN/VIDEO IN jacks.
z AV-IN *
3
: Select to use the external component connected to
LINE IN/VIDEO IN jacks or the iPod/iPhone connected by
using USB 2.0 cable ( pages 28 and 36)
z iPod : Select to use the iPod/iPhone connected by using JVC
KS-U30. ( page 28)
*
1
To change the setting, turn off the AV source by pressing [AV Off] on <AV Menu> screen and select ” AV Off ” as the
rear souce beforehand. <AV Input> setting can be changed only when <Input> setting in <Navigation Input>
is set to <Off>.
*
2
The initial setting is <iPod> for KW-AV70BT, and <AV-IN> for KW-AV78BT.
*
3
When <AV Input> is set to <AV-IN>, the video from iPod/iPhone is not displayed on the screen.
EN_KW-AV70JJW.indb 50 11/12/13 13:09