EasyManuals Logo

JVC KW-DB92BT User Manual

JVC KW-DB92BT
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
8
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Select a stored station
Press or one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the
knob to confirm.
Other settings
1
Press and hold .
2 Turn the volume knob to select [
TUNER
], then press the knob.
3 Turn the volume knob to select an item
(
see the following table
)
,
then press the knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press to exit.
To return to the previous setting item, press .
Default:
XX
RADIO TIMER ( 6)
SSM
SSM 01 – 06
/
SSM 07 – 12
/
SSM 13 – 18
: Automatically presets up to
18 stations for FM. “SSM” stops flashing when the first 6 stations are stored.
Select
SSM 07 – 12
/
SSM 13 – 18
to store the following 12 stations.
LOCAL SEEK ON
:Searches only FM stations with good reception.;
OFF
:Cancels.
Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
IF BAND AUTO
:Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.);
WIDE
:Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
ANALOG RADIO
“ST” lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1
Press repeatedly to select FM or AM.
2 Press to search for a station automatically.
(or)
Press and hold until “M” flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 8JS_JVC_KW_R920BT_DB92BT_E_EN_1.indd 8 3/11/2015 9:00:00 AM3/11/2015 9:00:00 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KW-DB92BT and is the answer not in the manual?

JVC KW-DB92BT Specifications

General IconGeneral
MP3 playbackYes
DIN size2 DIN
Impedance4 Ω
Output power22 W
Product colorBlack
Volume controlRotary
Frequency range20 - 20000 Hz
Audio output channels- channels
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)105 dB
AM band range531 - 1611 kHz
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Supported radio bandsAM, DAB+, FM, LW, MW
Display typeLCD
USB version2.0
USB port positionFront
Bluetooth profilesA2DP, AVRCP, HFP, PBAP
Line outputs (RCA)6
USB ports quantity1
Weight and Dimensions IconWeight and Dimensions
Weight1600 g
Dimensions (WxDxH)178 x 112 x 158 mm

Related product manuals