JVC KW-M740BT - Other External Components; View Camera

Other External Components
40
Other External Components
View Camera
NOTE
• To connect a camera, see P.62.
• To use a rear view camera, a REVERSE lead
connection is required. (P.61)
• If [Rear Camera Interruption] is set to on, the
camera screen is displayed when you shift the
gear to the reverse (R) position.
Ñ Display the camera screen
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [Camera].
 View camera screen appears.
3
Adjust each item as follows.
To erase the caution message, touch the
screen.
1
1
Camera off
Touch to exit the camera screen.
Ñ Camera Setup
1
Press the [FNC] button.
 Popup menu appears.
2
Touch [ ].
 HOME screen appears.
3
Touch [ ].
 SETUP Menu screen appears.
4
Touch [Camera].
 Camera screen appears.
5
Set each item as follows.
■ [Rear Camera Interruption]
[ON ](Default): Displays the picture from the
rear view camera when you shift the gear
to the reverse (R) position.
[OFF]: Select this when no camera is
connected.
■ [Parking Guidelines]
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
■ [Guidelines SETUP]
If you select [ON] for [Parking Guidelines],
adjust the parking guidelines. See To adjust
the parking guidelines (P.41).
!B5A-2304-00b_KWV-M_En.indb 40 2019/04/26 10:56