Remote control
57English
Functions of the Remote
control Buttons
Key
Name
Function
SRC Switches to the source to be played.
In hands-free mode, hangs up the
phone.
VOL + – Adjusts the volume.
AT T Lowers the volume by pressing the
key once.
Restores the previous volume by
pressing the key twice.
DISP Switches the screen between the
current source and the App screen
from the connected iPod touch/
iPhone/Android.
FM/R
AM/S
Selects the folder to be played.
During tuner source, select FM/ AM
band to be received.
E 2
F 3
Selects the track or file to be played.
ANGLE Not used.
When a call comes in, answers the call.
DIRECT Switches to the direct search mode.
For details on the direct search mode,
see Direct search mode (P.57).
ASPECT Changes the aspect ratio.
• To check the current aspect ratio
setting, operate on the touch panel.
(P.43)
Key
Name
Function
Numeric
Keypad
• Enters a preset station number
(1 - 6)
• Specifies the number to search in
direct search.
For details on the direct search
mode, see Direct search mode
(P.57).
CLR Deletes a character while in direct
search mode.
ENT Performs the selected function.
Ñ Direct search mode
Using the remote control, you can jump
directly to the desired file, track chapter, etc.
with entering the number corresponding to
the content.
NOTE
• This operation cannot be performed for USB
device and iPod.
1
Press the [SRC] button several times until
the desired content appears.
The available contents are different
depending on the source.
■ Tuner
Frequency value
2
Press the [DIRECT] button.
3
Enter the number of the content you want
to play using the numeric keypad.
4
Press the [E] or [F] button.
The content you entered is played.
!B5A-2304-00b_KWV-M_En.indb 57 2019/04/26 10:56
To Next Page
Loading...
