EasyManua.ls Logo

JVC KW-M740BT - Sound Effect

JVC KW-M740BT
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Controlling Audio
53English
7
Touch [Dual Zone].
8
Set each source as follows.
[Zone Select]
Touch [Single Zone] to turn off the dual
zone function.
[Front Source] [Rear Source]
Select the audio source for each.
[Rear VOL.]
Adjusts the rear source volume.
NOTE
When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
When the dual zone function is set to on, the
following functions are not available.
Output from the subwoofer
Subwoofer Level/ Bass Boost (P.53)
Equalizer Control/ Sound Effect/ Listening
Position (P.51, 53, 54)
Speaker Setup (P.49)
High-resolution Sound Source File Playback
You cannot select iPod if it is connected via
Bluetooth.
If you select USB, iPod, Spotify, Bluetooth audio,
Mirroring (WebLink), Apple CarPlay or Android
Auto as the Front Source, you cannot select USB
or iPod as the Rear Source.
Sound Effect
You can set sound effects.
1
Press the [FNC] button.
Popup menu appears.
2
Touch [ ].
HOME screen appears.
3
Touch [ ].
Source selection screen appears.
4
Touch [Audio].
Audio screen appears.
5
Touch [Sound Effect].
6
Set each item as follows.
[Bass Boost]
Sets the amount of bass boost among “OFF”/
“1”/ “2”/ “3”.
[Loudness]
Sets the amounts of boost of low and high
tones.
“OFF”, “Low, “High”
[Volume Link EQ]
Reduces the driving noise by raising the
bandwidth.
“OFF”, “ON”
[Space Enhancement]
Select the feeling of sound space
enhancement.
“OFF”/ “Small”/ “Medium”/ “Large”.
This setting is not available during tuner
source.
!B5A-2304-00b_KWV-M_En.indb 53 2019/04/26 10:56

Table of Contents

Related product manuals