79
9
Connecting Devices
Connecting a USB Storage Device
USB Cable
(not included)
Adapter
Portable
hard Disk
USB Hub
USB
1. Switch off the TV before connecting any USB storage device.
2. Connect your USB storage device to the USB port of your TV. If your USB device is powered by the main, plug the connected
devices into the mains socket and switch on.
3. Press the STANDBY button on the remote control to turn on your TV
You must use a USB storage device with a minimum of 2GB of storage space.
• Some versions of portable hard disk may require more power than the TV USB socket can provide. To ensure correct
operation please use the power adapter for that device.
• If a USB hub is used, make sure its mains adapter is connected to the mains supply as the total current consumption may
exceed 500mA.
• The file system only supports FAT32 format.
• Disconnect the USB storage device if it is not in use.
Rear Left Side
View of TV
Connecting
Devices
COMMON INTERFACE
USB
5Vdc
Max. 500mA
USB
5Vdc
Max. 500mA
SPDIF
Coax.OUT
VGA
ANT.
HDMI 2
(ARC)
HDMI 3
HDMI 1
To Next Page
Loading...
Need help?
General
