What to do if my JVC LCD TV has no picture?
If your JVC LCD TV displays no picture, ensure the TV is powered on and in operation mode by pressing the STANDBY button. Also, check that the AV cable is firmly connected to the TV, and the brightness level is appropriately set. Be sure to activate channel search. Finally, verify the channel is currently broadcasting; contact the broadcaster to confirm.
Why JVC LT-32DE9BJ cannot record programmes?
If your JVC LCD TV cannot record programs, it may be due to a full hard disk. Delete unnecessary programs to create space for new recordings. Also, check if the recording overlaps with another channel; stop the current recording or wait until it is finished.
What to do if I cannot watch scrambled channels on JVC LCD TV?
If you cannot watch a scrambled channel on your JVC LCD TV, verify that you have the appropriate Viewing Card. Reinsert the Viewing Card and ensure it initializes correctly. Check in the menu that the TV is detecting the Viewing Card, and confirm that you have a valid and working subscription to the channels you wish to view. Also, ensure that the Viewing Card is not damaged.
Why channel search does not work on JVC LT-32DE9BJ?
If the channel search isn't working on your JVC LCD TV, verify that your cable is correctly connected. Ensure the antenna setting in the menu is correct and that you are using an appropriate antenna capable of receiving VHF or UHF channels for your area.
How to improve poor picture quality on JVC LCD TV?
To improve poor picture or sound quality on your JVC LCD TV, position the antenna in a location free from obstructions. Ensure there are no mobile phones or microwave ovens nearby. Adjust the antenna direction for better picture and, if using an active antenna, set the antenna power in the menu to 'On' to improve reception. Check the signal levels and adjust your antenna if the level is too low, as weather conditions can affect signal strength.
How to fix no sound on JVC LCD TV?
If your JVC LCD TV has no or poor sound, first check that your AV cable is correctly connected. Then, verify the TV's volume levels and ensure it is not on mute. Finally, check the audio type or soundtrack option in the AV menu.
Why my JVC LT-32DE9BJ LCD TV has no power?
If your JVC LCD TV shows no message or has no power, check the main power cable to ensure it's properly plugged into a suitable and switched-on power outlet. Try connecting the power cable to a different outlet to rule out outlet issues.
Why I cannot update new software on JVC LCD TV?
If your JVC LCD TV does not show a message requesting an update, it means no software is currently available for update.
What to do if JVC LT-32DE9BJ LCD TV remote control is not working?
If the remote control for your JVC LCD TV isn't working, make sure the top end of the remote is pointed directly towards the receiving part of the TV. Try removing and reinserting the batteries, or replace them with a new set.
General| Resolution | 1366 x 768 Pixels |
|---|---|
| Display Type | LCD |
| HD Technology | HD Ready |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Aspect Ratio | 16:9 |
| Contrast Ratio | 3000:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| VGA Input | Yes |
| Component Input | Yes |
| Composite Input | Yes |
| Headphone Jack | Yes |
| Screen Size | 32 inches |
| Standby Power Consumption | 0.5W |
To Next Page
