23
4
Initial Setup
Selecting the Input Source
1. Press the button on the right bottom panel under the TV frame or the INPUT
button on the remote control to display the Input source list.
2. Press the
buttons to select the input source that you want: DTV / ATV /
SCART / YPbPr / PC / HDMI1 / HDMI2 / HDMI3 / AV / USB.
3. Press the OK button to confirm your selection. If you do not press the OK button
to confirm, the TV will automatically confirm the selected input source within 4
seconds.
Alternative
Press the TV.RD button to switch to TV / digital radio channels directly.
Input Source
DTV
ATV
AV
SCART
YPbPr
HDMI1
HDMI2
HDMI3
PC
USB
OK
Channel Selection
• Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the channel.
Press the OK button to view the selected channel.
• If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
channel will then be unlocked (refer to page 43 for details on Block Channel).
• Press the FAV button to view the Favourite List. Then use the
buttons to highlight and select the channel. Press the OK
button to view the selected channel (refer to page 26 for details on Channel Edit).
• Press the
button to return to the previously viewed channel.
Listening to the Radio (Radio Mode)
• In DTV mode, press the TV.RD button to switch between DTV and Digital radio channel.
• Press the CH
/ buttons on the remote control repeatedly to change the radio stations.
Alternative
Press the LIST button to enter the Channel List. Then use the buttons to highlight and select the station.
Press the OK button to listen to the selected station.
• Press the GUIDE button to see all the stations in the Programme Guide (refer to page 45 for details on EPG).
Display Channel Information
• Press the i button to view the current information.
Volume Adjustment
• Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
• If you wish to switch the sound off, press the
button. You can turn the volume down while your TV is in mute mode. Press
the VOL – button, you will see the volume level reduce, but you won't hear anything at the moment. To listen to your TV at
the new lower level, press the
button again or VOL + button.
To Next Page
Loading...
Need help?
General
