USE SETTING TROUBLE?
18
䡵 To start “Service Scan”.
z If you set “Scan” to “Network”, the “Network” menu appears. Select broadcasting stations from a list.
z If “Attenuator” is set to “On”, “RF Attenuator” menu will appear during initial setting. Select “On” or “Off” and
press “OK” button. For more details on “Attenuator” g
Signal Check
You can check the broadcast signal level of the channel you
are watching.
Signal level: Poor < Acceptable < Excellent
z To check another broadcast
channel
The “Channel” is the frequency of the digital broadcasting. It differs from the channel number
displayed on the TV.
Factory Settings
All registered digital channels are deleted and the DTV menu settings are initialised. Digital
channels are reregistered.
Mode Add
Start Scan
Scan completed! Store services?
Yes No
A select “Start Scan”
B start scanning
B set
A select “Yes”
BBC
Network Name
ITV
C set
A select
B registered / cancel
select
Exit
MENU
Navigate
Signal Check
14:00
05/05/2007
33
Service
Channel
BBC ONE
BBC TWO
BBC THREE
Signal : Excellent
Signal Quality
Signal Strength
Are you sure you want to delete the PR list and
reset all settings?
Yes No
Initial setting will start again.
INSTRUCTIONS
“Initial settings” (P. 11 - 12)
A select “Yes”
B start
INSTRUCTIONS
“Attenuator” (P. 38)
LT-42DP8BJ_Digital.book Page 18 Wednesday, July 4, 2007 2:47 PM
To Next Page
Loading...
Need help?
General
