30
Menu Functions
INFORMATION menu
Some information is given only when certain input sources are in use.
LAN Settings
• Standby LAN
Allows the projector to provide the network function when it is in standby
mode. See "Controlling the projector remotely" for details on the network
function.
• PJLink Certification, Change PJLink Password
See "Utilizing the PJLink™ password function" for details.
• AMX Device Discovery
Allows the projector to be detected by AMX controller.
• DHCP, Projector IP Address, Subnet Mask, Default Gateway,
DNS Server, Apply
See "Configuring the LAN Settings" for details.
Reset All Settings
Returns all settings to the factory preset values.
The following settings will still remain: Language, Projector Position,
High Altitude Mode, Security Settings, LAN Settings.
Submenu Functions and Descriptions
Current System Status
Source
Displays the current signal source.
Picture Mode
Displays the current picture mode under the PICTURE menu.
Color Format
Displays input system format.
Resolution
Displays the native resolution of the input source.
Lamp Time
Displays the number of hours the lamp has been used.
To Next Page
Loading...
Need help?
General
