44
Maintenance
Indicators
There are 3 indicators which show the status of the projector. Check the following information
about the indicator lights. If there is anything wrong, turn the projector off and contact your
dealer.
Light
Status & Description
Power events
Orange Off Off
Stand-by mode
Green
Flashing
Off Off
Powering up
Green Off Off
Normal operation
Orange
Flashing
Off Off
Normal power-down cooling
Red Off Off
Downloading
Green Off Red
CW start fail
Red
Flashing
Off Off
Scaler shutdown fail (data abort)
Green Off Off
Burn-in ON
Green Green Green
Burn-in OFF
Lamp events
Off Off Red
Lamp error in normal operation
Off Off
Red
Flashing
Lamp is not lit up
Thermal events
Red Red Off
Fan 1 error (the actual fan speed is ±25% outside the
desired speed)
Red
Red
Flashing
Off
Fan 2 error (the actual fan speed is ±25% outside the
desired speed)
Red Green Off
Fan 3 error (the actual fan speed is ±25% outside the
desired speed)
Red
Green
Flashing
Off
Fan 4 error (the actual fan speed is ±25% outside the
desired speed)
Red
Flashing
Red Off
Fan 5 error (the actual fan speed is ±25% outside the
desired speed)
Red
Flashing
Red
Flashing
Off
Fan 6 error (the actual fan speed is ±25% outside the
desired speed)
Green Red Off
Temperature 1 error (over limited temperature)