11
Overview
Controls and functions
Control panel
1. POWER
Toggles the projector between standby
mode and on.
2. Top IR remote sensor
3. TEMPerature warning light
Lights up red if the projector's temperature
becomes too high.
4. LIGHT indicator light
Indicates the status of the light source.
Lights up or flashes when the light source
has developed a problem.
5. HIDE
Used to blank the screen picture. Press
most of the keys on the projector or remote
control to restore the picture.
6. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu
is activated, these keys are used as
directional arrows to select the desired
menu items and to make adjustments.
7. MENU
Displays the menu, or hides the menu if it is
displayed.
8. POWER indicator light
Lights up or flashes when the projector is
under operation.
9. Keystone keys ( , )
Launches the Keystone window. Use ,
to manually correct distorted images
resulting from an angled projection.
10.INPUT
Displays the source selection bar.
11.
Activates panel key lock. To unlock the
keys, press and hold for 3 seconds or
setting OSD menu using the remote
control.
12.OK
Activates the selected On-Screen Display
(OSD) menu item.
13.BACK
Goes back to previous OSD menus, exits
and saves any changes made using the
On-Screen Display (OSD) menu.
3
5
4
1
2
7
6
10
13
11
8
9
9
12
To Next Page
Loading...
Need help?
General
Weight and Dimensions
