EasyManuals Logo

JVC LX-NZ3BK User Manual

JVC LX-NZ3BK
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
Maintenance
Maintenance
Care of the projector
Cleaning the lens
Clean the lens whenever you notice dirt or dust on the surface.
Before cleaning any part of the projector, turn it off using the proper shutdown procedure (see
"Shutting down the projector"), unplug the power cable, and let it cool down completely.
Use a canister of compressed air to remove dust.
If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and
gently wipe the lens surface.
Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile
solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining
prolonged contact with rubber or vinyl materials may result in damage to the projector surface
and cabinet material.
Never touch the lens with your finger or rub the lens with abrasive materials. Even paper towels can
damage the lens coating. Only ever use a proper photographic lens brush, cloth, and cleaning solution. Do
not attempt to clean the lens while the projector is switched on or is still hot from previous use.
Cleaning the projector case
Before cleaning any part of the projector, turn it off using the proper shutdown procedure (see
"Shutting down the projector"), unplug the power cable, and let it cool down completely.
To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.
To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent.
Then wipe the case.
Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the case.
Storing the projector
To store the projector for an extended time:
Make sure the temperature and humidity of the storage area are within the recommended
range for the projector. Refer to
"Specifications" or consult your dealer about the range.
Retract the adjuster feet.
Remove the batteries from the remote control.
Pack the projector in its original packing or equivalent.
Transporting the projector
It is recommended that you ship the projector with its original packing or equivalent.

Other manuals for JVC LX-NZ3BK

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC LX-NZ3BK and is the answer not in the manual?

JVC LX-NZ3BK Specifications

General IconGeneral
Typelaser
Colorblack
Throw Typestandard throw
TV Tunerno
Portablefixed
Noise Level29 decibels
Color Brightness3000 lumens
White Brightness3000 lumens
Resolution4k (2160p)
Native Resolution1920 x 1080
Contrast Ratioinfinity:1 dynamic contrast ratio
Aspect Ratio16:9
Throw Ratio Range1.36-2.18
Response Time58 milliseconds
HDRyes
HDR Formathdr 10, hybrid log-gamma (hlg)
3 Chip Technologyno
3Dno
Minimum Screen Size60 inches
Maximum Screen Size200 inches
Focus Adjustmentmanual
Optical Zoom1.6x
HDMI Ports2
HDMI 2.2 Ports1
HDMI ARC Portsno
USB Ports0
RS-232 Port1
Video Inputhdmi
Inputshdmi, usb type a, svga, serial, 3.5mm audio
Remote Controlyes
Weight and Dimensions IconWeight and Dimensions
Depth13 1/2 inches
Height5 3/4 inches
Width15 7/8 inches
Net Weight13.89 pounds

Related product manuals