Why my JVC LX-FH50 does not turn on?
If your JVC Projector isn't turning on, there could be a few reasons. First, ensure the power cable is securely plugged into both the projector's AC inlet and the power outlet, and that the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to turn it on again. Finally, check that the lamp cover is correctly attached.
What to do if my JVC Projector has no picture?
If there is no picture on your JVC Projector, start by checking that the video source is turned on and the signal cable is properly connected. Next, verify that the projector is correctly connected to the input source device. Finally, make sure you've selected the correct source using the SOURCE key on either the projector or the remote control.
Why JVC LX-FH50 remote control does not work?
If the remote control for your JVC Projector isn't working, first replace the batteries with new ones. If that doesn't solve the issue, make sure there are no obstacles between the remote and the projector. Also, ensure you are within 8 meters (26.2 feet) of the projector.
How to fix blurred picture on JVC LX-FH50 Projector?
If the picture on your JVC Projector is blurred, try adjusting the focus of the lens using the focus ring. Also, ensure that the projector and the screen are properly aligned by adjusting the projection angle, direction, and height if needed. Finally, if your projector has one, remove the lens cover.
What to do if 3D content does not display correctly on JVC Projector?
If 3D content isn't displaying correctly on your JVC Projector, begin by recharging the 3D glasses. Next, ensure that the settings in the 3D menu are correctly configured. Also, confirm that you are using a 3D Blu-ray Disc. Lastly, verify that the correct input source has been selected using the SOURCE key on the projector or remote control.
How to fix unstable image on JVC LX-FH50 Projector?
If the image on your JVC Projector is unstable, it's likely due to loose connection cables. Ensure that all connection cables are securely connected to both the projector and the signal source, using the appropriate terminals.
General| Resolution | 1920 x 1080 |
|---|---|
| Contrast Ratio | 20, 000:1 |
| Weight | 3.3 kg |
| ANSI Lumens | 5000 |
| Native Resolution | 1920 x 1080 |
| Lens Shift | Vertical: ±60%, Horizontal: ±23% |
| Display Technology | DLP |
| Lamp Type | UHP |
| Dimensions | 315 x 118 x 235 mm |
| Video Modes | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Screen Size | 40-300 inches |
| Lamp Life (Normal Mode) | 4000 hours |
| Inputs | HDMI, VGA, Composite |
Details compliance with FCC Part 15 rules for digital devices.
States compliance with FCC Rules, subject to specific conditions.
Specifies the sound pressure level at the operator position.
Essential instructions for safe operation and placement of the projector.
Guidelines for choosing a safe and suitable operating environment.
Warns about hot surfaces and potential burns during operation.
Provides recommendations for secure ceiling installation.
Advises on preventing moisture buildup after temperature changes.
Warns against using flammable or damaging liquids near the projector.
Information on handling hazardous materials in the product.
Lists all items included in the projector package.
Details the buttons and indicators on the projector's control panel.
Explains the functions of each button on the remote control.
Step-by-step guide for installing and replacing the remote's battery.
Specifies the optimal distance and angle for remote control operation.
Factors to consider and methods for projector placement.
How to determine projection distance and image size.
Instructions for adjusting the vertical position of the projected image.
Steps to power on and initiate projector operation.
Procedure for safely powering off the projector.
How to choose and switch between different connected video signals.
Using adjuster feet to aim and level the projector.
Function to optimize picture quality for PC signals.
Adjusting focus and zoom for optimal image appearance.
Manually correcting trapezoidal image distortion.
Adjusting the four corners of the projected image.
Introduction to the On-Screen Display menus and navigation.
Settings for picture modes, brightness, contrast, and color.
Adjustments for tint, sharpness, color temperature, and 3D color management.
Advanced picture settings like Black Level, Noise Reduction, Gamma.
Options for screen color, aspect ratio, keystone, and corner correction.
Settings for digital zoom, 3D display, and 3D sync.
Manages input source selection and auto search settings.
Configuration for HDMI settings, audio, and picture position.
Basic system setup options including menu display time and language.
Advanced system settings like lamp mode, auto power off, and splash screen.
Settings for presentation timer and panel key lock function.
Options for password security and closed captioning.
Displays current system status, source, picture mode, and lamp time.
Overview of the main menus, submenus, and their options.
Detailed breakdown of options within System Setup Basic menu.
Detailed breakdown of options within System Setup Advanced menu.
Steps to set up network connectivity for remote control.
How to operate the projector using a web browser interface.
Advanced e-Control features, password protection, and info page.
Using PJLink protocol for projector control and monitoring.
List of commands and their descriptions for PJLink control.
Instructions for cleaning the lens and projector case.
How to check lamp usage and extend lamp life.
Options to adjust lamp power for brightness and longevity.
Configuring the automatic shutdown feature.
Warnings and indicators for lamp replacement.
Detailed steps and safety precautions for lamp replacement.
Further steps for lamp removal, installation, and securing.
Resetting the lamp timer after replacement.
More supported timing details for PC input, including 3D signals.
Timing specifications for HDMI input signals.
Further timing details for HDMI input, including 3D signals.
Timing specifications for Component-YPbPr input signals.
Timing specifications for S-Video and Video input signals.
To Next Page
