6
Important safety instructions
crucial internal parts. To prevent the projector from possible damage, do not use the projector for
at least 2 hours when there is a sudden change in temperature.
Avoid volatile liquids
Do not use volatile liquids, such as insecticide or certain types of cleaner, near the projector. Do
not have rubber or plastic products touching the projector for a long time. They will leave marks
on the finish. If cleaning with a chemically treated cloth, be sure to follow the cleaning product’s
safety instructions.
Disposal
This product contains the following materials which are harmful to human bodies and
environment.
• Lead, which is contained in solder.
To dispose of the product, consult your local environment authorities for regulations.
For the customers in the U.S.A. and Canada
CAUTION
Use the controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
This Projector is classified as a CLASS 3R LASER PRODUCT.
This CLASS 3R LASER PRODUCT label and Caution label is located on the Rear Side surface
of the projector.
Location information of the label
APERTURE LABEL