ConnectingOtherEquipment
You can cennect audio equipment--used enly as a playback
device.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
AUX
/Stereo mini plug cord (not supplied)
'-_1_:=_ _#_ Audio equipment ]
To audio output
NOW you are ready to plug in the unit and
other connected equipment.
Canceling the DisplayDemonstration
When connecting the AC power cord into a wall outlet, the
unit automatically starts the display demonstration.
On the unit ONLY:
To cancel the display demonstration,
press CANCEL/DEMO while the display
demonstration is shown on the display.
_When you press other buttons
The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it.
Tostartthe displaydemonstrationmanually
Press trod held CANCEL/DEMO again fer
more than 2 seconds.
For playing the other equipment through this unit,
connect between the audio output jack on the other
equipment and AUX jack on the front of the unit by using a
stereo mini plug cord (not supplied).
_ f the audio output on the other equipment is not
stereo mini plug type
Use a plug adapter to convert the stereo mini plug to the
corresponding plug of the audio output.
To Next Page
Loading...
