JVC MX-J200 - Removing the Capstan Belt; Removing the Capstan Motor

MX-J200
1-20
Remove the two screws D attaching the capstan
motor.
Unsolder the motor wire.
1.
2.
Removing the Capstan motor
(See Fig.5to7)
Remove the capstan motor.
Remove the capstan belt.
ATTENTION: Do not stain the belt with grease.
1.
2.
Removing the Capstan belt (See Fig.7)
Fig.5
Fig.6
Fig.7
Cassette mechanism assembly
FR belt
D
Capstan motor
Solder part
FR belt
Capstan belt
Marke red line
Motor wire
Capstan motor
Un solder